Pambry Audio Auxiliary Tester
The Pambry PED0900 Audio Auxiliary Tester provides a simple way to check a headset, handset, headphone or just a microphone including any PTT switch. It can also emulate a radio transceiver to provide switched sidetone back to the user.
Key Features
- Separate test for left and right earphone
- Microphone audio test,using built-in speaker
- Earphone test using built-in microphone or 1kHz test tone
- PTT line test
- Microphone line test
- Earphone line test
- Radio side tone emulation – constant/PTT
- Talk through function
- Speaker activation – Constant/PTT
- Full/half duplex communication between box and headset
- Auxiliary power for active headsets 5V/200mA
- Remembers last settings after switch off
- Battery and mains operated
- Auto power off function – 1 hour
- Battery life time 50 hours
Specifications
Microphone section
Electret
5KΩ/10V
Amplified electret
150Ω AC / 10V (feed 470Ω)
Dynamic
Hi/Lo 150Ω / 5Ω
Earphone section
Impedance
16Ω – 600Ω
Frequency response
10Hz – 20kHz
Power
Up to 100mW per channel-adjustable
Internal speaker
Frequency response
200Hz – 20kHz
Power
Up to 6W – adjustable
Amplifier type
D-class
Power source
Battery
Li-Ion 7.4V / 2.6Ah
Battery life
50 hours
Low battery indicator
–
External power
12V DC
Automatic charging when connected to 12V DC
–
Notes
All specification values are typical unless otherwise stated.
Continuous product development and innovation are the policy of our company. Therefore, we reserve the right to change the specifications without prior notice.
Industries served
Where ever there is a requirement for checking audio equipment the Pambry Electronics Audio Auxiliary Tester provides a simple way to check a headset, handset, headphone or just a microphone including any PTT switch.
